Fix an Air Lock In Pipes

Top 7 Best Ways To Fix an Air Lock In Pipes


Sharing is caring!

The art of simplifying things and explaining everything in terms of numbers and variables is known as engineering. However, a human being cannot account for every natural phenomenon in terms of mere numbers and variables leading to errors in basic engineering models. Although these errors can be fixed trial and error or replaced entirely with something new. The fact remains that in certain cases we have made blunders. One such major blunder was made by engineers who designed pipelines.

They may have perfectly accounted for the radius, volume, and type of material that would perfectly suit for this task, but they made a huge mistake by assuming that these pipelines will only carry intended fluids through them. But that’s not always the case, as we know the air is present everywhere, and yes even in the pipelines. This causes airlocks, simply put airlocks are caused when gas gets trapped inside a pipe filled with fluid. Well, you might ask where does this air come from? It might surprise us to learn that getting gases like air in liquid pipelines is somewhat inevitable. The gas might already be present in the pipeline or it might be mixed within the liquid. There are thousands of ways through which air could get into your pipelines.

So, no matter what everyone might have faced airlock issues once in their lifetime, irrespective of whether the airlock occurs in your pipe, refrigerator, or air conditioner. Well, an airlock in appliances can be pretty dangerous so we would recommend calling for professional help, if you are having issues with your air conditioner then try contacting air conditioning service orange county ca. However, if you are facing issues with your pipes.

Here are the top 7 best ways to fix an airlock in pipes

 Using a Hosepipe

 This is probably one of the most common and quickest ways to deal with an airlock in pipes. All you need to do is attach a hosepipe to a pipe. Now, you need to connect this pipe which is in fact connected to a hosepipe to the problematic vault and wrap or connect the other end of the pipe to a working tap. The important thing to note is that you need to seal this connection properly and make sure that no air or water pressure escapes during the process. Pull the end of the pipe as tightly as you can. Now turn on the problematic tap.

 The next step is pretty much very intuitive, yes, turn on the working tap. The way this works is that it fills up the pipes and creates enough pressure on the problematic tap to get our work done. This pressure eventually reaches down to the pipe and breaks the airlock. Don’t worry it does not work instantaneously, this process takes around 2 to 3 minutes. After, few minutes simply remove the pipe and the hose and check your tap. If you are still facing issues then try again. However, if the problem persists, even after multiple tries then consider other methods.

 Open All the Faucets

 It’s not a proper scientific method, rather a quite unique one. This method requires no special skills or tools to implement. All it takes to open all the faucets in your home is your two hands. When you open all the taps, there is an increased pressure on the pipe, which might in fact break the airlock. Well, it may prove to be ineffective, but it is worth a try. So, when you are trying this method, make sure to open every faucet of the sinks, shower, etc, or else it might not work.

 This process might take several minutes and also there might be a bit of water wastage, but one thing is for sure that it will break the air locks from places that are harder to reach.

 Bleed Your Radiator System

 When the airlock occurs in your boiler the best thing you could do is bleed all of the radiators of your home if you have one. Just turn off your boiler and open all your radiators one at a time.

 Washing Machine

 This one is just a variation of the hosepipe method, which involves the use of your washing machine. All you need to do is replace the working tape side of the pipe with the hot and cold water valves of your machine and you are done. The rest of the process is exactly similar to the hosepipe method.

 Shower Head

 This one is a bit difficult as it utilizes the showerhead covered with few plastic sheets to act as a membrane that could send pressure back. So, if you are unsure about doing all that work, we would recommend calling for professional help.

 Go For Full Repair

 If nothing works its best to let the professional do a full repair. This might cost you, but believe us it’s better than causing a long term loss.

You may also like